|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DK Series Enhanced Performance K Series RFI Power Line Filters DK3 UL Recognized CSA Certified VDE Approved DK Series The DK series RFI power line filters are general purpose common mode and differential mode filters with higher performance line-to-line attenuation than the VK series. The EDK series has the same high performance line-to-line attenuation while still meeting the very low leakage current requirements of VDE portable equipment and UL544 nonpatient care equipment. DK1 DK6 Specifications Maximum leakage current, VDK Models EDK Models each line-to-ground @ 120 VAC 60 Hz: .4 mA .22 mA @ 250 VAC 50 Hz: .7 mA .38 mA Hipot rating (one minute): line-to-ground line-to-line Operating frequency: 2250 VDC 1450 VDC 50/60 Hz 120/250 VAC Electrical Schematic Rated voltage: Rated current: 1VDK/1EDK 3VDK/3EDK 6VDK/6EDK 10VDK/10EDK 20EDK/20EDK 1A 3A 6A 10A 20A @ 120 VAC @ 250 VAC 1A 3A 6A 8A 16A Resistor location for reference only. Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Rating VDK Models 1A, 3A 6A, 10A, 20A EDK Models 1A, 3A 6A, 10A, 20A .15 18 10 17 10 .5 30 22 27 19 Frequency-MHz 1 5 10 40 30 33 25 48 39 45 34 48 44 45 40 30 40 50 40 46 Line-to-line in 50 ohm circuit DK 18 Current Rating .15 .5 47 43 Frequency-MHz 1 5 10 62 55 60 65 50 60 30 45 55 VDK, EDK Models 1A, 3A 18 6A, 10A, 20A 20 Libertyville, IL (847) 680-7400 Series DK Case Styles Metric shown in italics. Case Dimensions Metric shown in italics. VDK1/EDK1 Part No. 1VDK1, 1EDK1 1VDK3, 1EDK3 3VDK1, 3EDK1 6VDK1, 6EDK1 3VDK3, 3EDK3 6VDK3, 6EDK3 Typical dimensions .250 Terminals: 6.35 A (max) 3.35 85.1 2.07 52.6 3.85 97.8 2.56 65.0 3.85 97.8 2.57 65.3 3.85 97.8 3.46 87.9 B (max) 2.07 52.6 2.07 52.6 2.07 52.6 2.07 52.6 2.07 52.6 2.07 52.6 2.58 65.5 2.58 65.5 C (max) 1.16 29.5 1.16 29.5 1.16 29.5 1.16 29.5 1.32 33.5 1.32 33.5 1.78 45.2 1.78 45.2 D .015 .38 E (max) 2.81 71.4 2.81 71.4 3.35 85.1 3.35 85.1 3.35 85.1 3.35 85.1 3.35 85.1 3.35 85.1 2.375 60.33 2.375 60.33 2.938 74.63 2.938 74.63 2.938 74.63 2.938 74.63 2.938 74.63 2.938 74.63 (5) Holes: .07 1.8 Dia.(4) Slot: .07 x .16 1.8 x 4.1 Mounting holes: .1 8 8 4.78 Dia.(2) 10VDK1, 10EDK1 10VDK3, 10EDK3 20VDK1, 20EDK1 20VDK6 VDK3/EDK3 Ordering Information Consult your local Corcom sales representative for pricing. Typical dimensions Wire leads: 4.0 Min. 101.6 Mounting holes: .188 4.78 Dia. (2) 20VDK1/20EDK1 Available Part Numbers 1VDK1 1VDK3 3VDK1 3VDK3 6VDK1 6VDK3 10VDK1 10VDK3 20VDK1 20VDK6 1EDK1 1EDK3 3EDK1 3EDK3 6EDK1 6EDK3 10EDK1 10EDK3 20EDK1 Typical dimensions .07 .07 x .16 Terminals: .250 (5) Holes: Dia.(4) Slot: 6.35 1.8 1.8 x 4.1 Mounting holes: .188 Dia.(2) 4.78 20VDK6 DK 19 Torque 18 2 in.lb. Libertyville, IL (847) 680-7400 |
Price & Availability of 3EDK1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |